 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| Micrel, Inc. 5-BIT 2:1 MULTIPLEXER SY10E158 SY100E158 SY10E158 SY100E158 FEATURES s 550ps max. D to output s Extended 100E VEE range of -4.2V to -5.5V s 775ps max. SEL to output s Differential outputs s Fully compatible with industry standard 10KH, 100K ECL levels s Internal 75K input pulldown resistors s Fully compatible with Motorola MC10E/100E158 s Available in 28-pin PLCC package DESCRIPTION The SY10/100E158 offer five 2:1 multiplexers with differential outputs, designed for use in new, highperformance ECL systems. The multiplexer operation is controlled by the SEL (Select) signal which selects one of the two bits of input data at each mux to be passed through. BLOCK DIAGRAM D0a D0b MUX SEL PIN NAMES Pin Q0 Q0 D0a-D4a D0b-D4b SEL Function Input Data a Input Data b Select Input True Outputs Inverted Outputs VCC to Outputt D1a D1b MUX SEL Q1 Q1 Q0-Q4 Q0-Q4 VCCO D2a D2b MUX SEL Q2 Q2 D3a D3b MUX SEL Q3 Q3 D4a D4b MUX SEL Q4 Q4 SEL M9999-032006 hbwhelp@micrel.com or (408) 955-1690 1 Rev.: E Amendment: /0 Issue Date: March 2006 Micrel, Inc. SY10E158 SY100E158 PACKAGE/ORDERING INFORMATION D3a VCCO Q4 VCCO Ordering Information(1) Part Number 18 17 D4a D3b Q4 25 24 23 22 21 20 19 Package Type J28-1 J28-1 J28-1 J28-1 J28-1 J28-1 J28-1 J28-1 Operating Range Commercial Commercial Commercial Commercial Commercial Commercial Commercial Commercial Package Marking SY10E158JC SY10E158JC SY100E158JC SY100E158JC SY10E158JZ with Pb-Free bar-line indicator SY10E158JZ with Pb-Free bar-line indicator SY100E158JZ with Pb-Free bar-line indicator SY100E158JZ with Pb-Free bar-line indicator Lead Finish Sn-Pb Sn-Pb Sn-Pb Sn-Pb Matte-Sn Matte-Sn Matte-Sn Matte-Sn D4b D2a D2b VEE SEL D0a D0b 26 27 28 1 2 3 4 5 6 7 8 9 10 11 Q3 Q3 VCC Q2 Q2 VCCO Q1 SY10E158JC SY10E158JCTR(2) SY100E158JC SY100E158JCTR(2) SY10E158JZ(3) SY10E158JZTR(2, 3) SY100E158JZ(3) SY100E158JZTR(2, 3) Notes: PLCC TOP VIEW J28-1 16 15 14 13 12 VCCO Q0 28-Pin PLCC (J28-1) VCCO Q1 D1a D1b Q0 1. Contact factory for die availability. Dice are guaranteed at TA = 25C, DC Electricals only. 2. Tape and Reel. 3. Pb-Free package is recommended for new designs. M9999-032006 hbwhelp@micrel.com or (408) 955-1690 2 Micrel, Inc. SY10E158 SY100E158 TRUTH TABLE SEL H L Data a b DC ELECTRICAL CHARACTERISTICS VEE = VEE (Min.) to VEE (Max.); VCC = VCCO = GND TA = 0C Symbol IIH Parameter Input HIGH Current D SEL IEE Power Supply Current 10E 100E -- -- 33 33 40 40 -- -- 33 33 40 40 -- -- 33 38 40 46 -- -- -- -- 200 150 -- -- -- -- 200 150 -- -- -- -- 200 150 mA -- TA = +25C TA = +85C Max. Unit A Condition -- Min. Typ. Max. Min. Typ. Max. Min. Typ. AC ELECTRICAL CHARACTERISTICS VEE = VEE (Min.) to VEE (Max.); VCC = VCCO = GND TA = 0C Symbol tPD Parameter Propagation Delay to Output D SEL Within-Device Skew Rise/Fall Time 20% to 80% TA = +25C TA = +85C Max. 550 775 -- 650 ps ps 1 -- Unit ps 225 400 -- 275 385 600 60 425 550 775 -- 650 225 400 -- 275 385 600 60 425 550 775 -- 650 225 400 -- 275 385 600 60 425 Condition -- Min. Typ. Max. Min. Typ. Max. Min. Typ. tskew tr tf Note: 1. Within-device skew is defined as identical transitions on similar paths through a device. M9999-032006 hbwhelp@micrel.com or (408) 955-1690 3 Micrel, Inc. SY10E158 SY100E158 28-PIN PLCC (J28-1) Rev. 03 MICREL, INC. 2180 FORTUNE DRIVE SAN JOSE, CA 95131 TEL USA + 1 (408) 944-0800 FAX + 1 (408) 474-1000 WEB http://www.micrel.com The information furnished by Micrel in this data sheet is believed to be accurate and reliable. However, no responsibility is assumed by Micrel for its use. Micrel reserves the right to change circuitry and specifications at any time without notification to the customer. Micrel Products are not designed or authorized for use as components in life support appliances, devices or systems where malfunction of a product can reasonably be expected to result in personal injury. Life support devices or systems are devices or systems that (a) are intended for surgical implant into the body or (b) support or sustain life, and whose failure to perform can be reasonably expected to result in a significant injury to the user. A Purchaser's use or sale of Micrel Products for use in life support appliances, devices or systems is at Purchaser's own risk and Purchaser agrees to fully indemnify Micrel for any damages resulting from such use or sale. (c) 2006 Micrel, Incorporated. M9999-032006 hbwhelp@micrel.com or (408) 955-1690 4 |
Price & Availability of SY10E15806
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |